Oil Removal
Please do not try and solve your oil problem with silly things like ... let's see ... pouring dry cement, setting the oil mark on fire, Coca-Cola, kitty litter, pool acid or any of the other gazillion so-called "solutions" you can find on the Internet. It will not work! All you will do is (1) waste time, (2) waste money and (3) eventually make it impossible for us to remove all the oil.
Also note that the longer you wait, the more chance there is that the oil - even once removed - will leave a permanent, darker stain on your paving (grey pavers are the most prone to staining if oil is not removed quickly). Oil in and of itself stains, so even if we remove the oil, the chances of a permanent stain on your pavers or concrete, are enormous. So, please do yourself (and us) a favour and contact us as soon as possible after the oil disaster has occurred.
 Easy DIY |
Non-Toxic |
Non-Corrosive |
|
|
Eco-friendly and Organic |
10 Times More Effective |
A Nightmare
Ever tried to get spilt oil out of surfaces like brick paving, concrete, garages, workshop floors, etc.? Absolute nightmare, isn't it! There are many companies out there who claim they can remove it. There are a hundred products out there that say they do. The fact is nobody and nothing works. We know, even we tried endlessly until we found something that worked.
Why not buy the product from us and clean your oil spill yourself?
Why Is It So Difficult To Remove Oil?
Oil will soak into any surface. The problem is that the more porous the surface, the deeper it will go. Until now the only way to try and get rid of it was to use something like a heavy duty degreaser and a lot of scrubbing. Initially it may even look like it has worked, but if you look at the area the next day, you'll see that the oil has come back.
The reason why this happens is quite simple: detergents and degreasers work by binding oil molecules to water molecules. And these products are not very good at it even at the best of times. You may manage to get the oil off the surface so it looks clean. However, as the area dries out the oil that has soaked deeper in starts to rise back up to the top. So, as if by magic, the next day the oil marks reappear. There's even a proper name for it: it's called 'wicking'.
Oil Remover
We are the exclusive importers of the first product that can successfully remove oil from virtually any surface without being harmful to the environment. It is an organic, non-corrosive, non toxic, completely eco-friendly plant-based solvent that is over 10 times more effective than any other product on the market.
It works differently to detergents - it doesn't try to bind oil molecules to water molecules. It works by actually dissolving the oil and carrying it away. The residue is completely harmless and can even be washed onto grass and other plants with no harm done. In test after test we have consistenly achieved the most astonishing results; and it's not limited to use on floor surfaces either. Because it is non-corrosive it will not attack or damage virtually any surface it is applied to. It is therefore completely harmless to rubber, plastic, metal, composites, etc. It will effortlessly remove accumulated grease and oil deposits from construction plant, factory plant, machine equipment ... you name it, it cleans it. It's so good it is even endorsed by Boeing for removing accumulated fuel and hydraulic deposits from the underside of aircraft. They think it's good stuff. So do we. It really is the first Oil Remover that actually works!
So if you have an oil problem, we have an oil solution. We can quickly and effectively remove oil deposits from any surface, large or small.
* Please note that we do not bring out the steam machine to remove oil.
Get the Product From Us And Do It Yourself
If you want to DIY, please contact us with a full description of your problem, the area size affected, include pics please, and we will tell you how much product you need and also arm you with clear instructions of how to go about the job.
If you spill oil, don't wait! The longer you wait before you take action, the harder the oil is to get out, the more product you have to use, the more time you have to spend and the bigger the chance of the oil - even when removed - leaving behind a feint but permanent stain.
|
The Best Way To Get A Quote from Us
All surfaces are different and we can therefore not give you an "average per sqm price" over the phone. We prefer to get all the information about a problem so that we can forward an accurate quotation. In order to do this, we need: 1. The area size in sqm (please, we don't quote "per room" ... just do the best you can with area size). 2. A detailed description of the problem. So please "tell us the full story" of your floor and its problem and try and be as thorough as possible. The more we know, the better we can quote. For example, telling us that your floor is "very dirty" doesn't help us; rather tell us whether there is old sealant on the floor, oil, what stains, wax, polish, soil ... whatever it may be, just tell us about it. 3. The physical address of the work site. If not the full address, then at least the suburb please. 4. Pictures of the problem. If emailing pics is a problem, send the pics via Whatsapp or Signal on 076 030 8191 (... remember to send the other info via email as it helps us keep track of our customers' specs and needs). Also, please, the pictures need to include a wide shot or two so we can get a sense of the area, then close-ups of tiles and its problems: pretend we are there, sitting on our haunches, having a look at the floor.
So, a good variety of pics is always good.
And in absolutely no time, we will send a tailor-made quote, just for you. If the job is too complicated or you don't feel like sending pics and measuring up, we will come out. |
